Best FOV Settings and Camera Tips

Dial in Motocross The Game FOV settings with a practical 120 baseline, 115 alternative, camera table, and steering values for clearer first-person riding.

A clean view of the track can make the difference between hitting a rut and fighting the bike. That is why Motocross The Game FOV settings matter: the field-of-view slider changes how much of the bike, track, and upcoming corner you can see in first person. The right Motocross The Game FOV settings also keep your reference points steadier, so you spend less time correcting and more time carrying momentum.

Motocross The Game FOV Settings: Quick Answer

For a practical baseline, set these Motocross The Game FOV settings to 120 on both Onboard 1 and Onboard 2. That wider view makes it easier to see the bike underneath you and read the track ahead. If 120 feels stretched or too fast at the edges, test 115 before you change anything else. The goal is not the biggest number on the slider; it is the clearest view you can hold consistently. A complete first-person camera settings setup keeps both onboard cameras at 120 FOV, with 115 as the lower test point.

Camera viewStarting FOVWhy it works
Onboard 1120Wider view for track awareness and bike reference
Onboard 2120Keeps the same visual scale when you switch views
Lower test value115Useful if 120 feels too wide at the screen edges
Camera-switch habitMatch bothAvoids a sudden change in perceived speed

The FOV slider added in an update made first-person riding more adaptable. Before you settle on a value, pick one camera view and keep the other matched. Switching between two different fields of view can make corner entry feel inconsistent even when the bike setup has not changed.

Why FOV Changes More Than Visibility

Field of view is a visibility tool, not a performance stat. A wider setting shows more of the bike and the track around it, which can help you judge ruts, braking points, and body position. A narrower setting makes the center of the screen feel larger, but it can hide the bike’s edges and the line beside you. Neither view changes the bike’s physics; it changes what you can see before you act.

A good field of view should let you spot your line early without making the track feel like it is rushing past. It should also keep the handlebars and front wheel readable, especially when you are leaning into a rut. If you cannot see the bike’s attitude, you are more likely to correct too late.

What you noticeFirst adjustmentKeep in mind
You cannot see the inside line or apexRaise toward 120Check that the bike still looks natural
The edges feel stretched or too fastLower toward 115Do not change steering at the same time
Switching cameras feels jarringMatch Onboard 1 and Onboard 2Consistency matters more than the exact number
You feel visually overwhelmedTest a lower valueComfort is part of usable visibility
You keep late-braking into cornersRecheck braking pointsFOV can reveal a problem, not fix it

Use one track you know well for comparison. Run several clean laps at 120, then several at 115 without changing steering or braking. If you keep looking for the inside line and cannot find it, the wider view may help. If the edges feel distorted and your turn-in gets late, tighten the view. Give each value enough laps to feel normal instead of judging it after one corner.

How to Tune FOV Step by Step

These Motocross The Game FOV settings are easiest to tune in a fixed order. Change the camera first, then the field of view, then your steering. If you adjust everything at once, you will not know which change caused the improvement or the problem.

StepActionTarget
1Choose a first-person onboard cameraOnboard 1 or Onboard 2
2Set both onboard cameras to 120A consistent wide baseline
3Run several clean laps on a familiar trackJudge visibility, not lap time
4Test 115 if the edges feel too wideA slightly tighter view
5Keep the better value on both camerasNo mismatch when switching
6Recheck steering after the FOV is setSmooth, predictable inputs

Do not chase a new FOV after every crash. The field of view should feel boring after a few laps: you notice the track, not the edges of the screen. If you are constantly changing between 120 and 115, you are resetting your visual reference points and making it harder to judge speed. Lock in one value, then work on braking points and corner speed.

A useful test is to enter a corner you know and look for your exit rut before you tip in. If you cannot find it without moving your eyes far from the center, the view may be too tight. If the bike feels small and distant, the view may be too wide. The best value is the one that lets you see the bike, the rut, and the next section without feeling like you are scanning the whole screen.

Pair FOV With Steering and Camera Controls

A wide view only helps if your inputs stay smooth. A 120 FOV gives you more visual information, but aggressive stick movements can still upset the bike. The steering baseline below is built around smooth analog control rather than quick flicks. Once your Motocross The Game FOV settings are comfortable, use these values as a starting point and give them time.

Steering settingBaseline valuePractical effect
Steering gain+1A middle ground for turn-in without feeling twitchy
Sensitivity-4Softens stick response for smoother inputs
Linearity0Keeps input behavior predictable
Dead zone5Filters small unintended stick movements

Steering gain at +1 is a middle ground: higher values around +3 to +5 can feel too sensitive, while 0 or -1 can make the bike feel reluctant to turn. Sensitivity at -4 softens stick response, linearity at 0 keeps the input predictable, and a dead zone of 5 filters small unintended movements. These are personal-preference values, but they are a sensible baseline for a 120 FOV setup.

Camera and controlBinding or habitWhy it helps
Camera switchingD-pad upKeeps thumbs near the steering and lean sticks
Look controlsD-padFrees the analog sticks for riding inputs
SteeringLeft analog stickSmooth, gradual direction changes
Rider leanRight analog stickBody position control without leaving the sticks
Sit and standHold rather than toggleAvoids repeated toggling during a moto
Rear brakeL3Allows brake taps in the air without releasing steering

Camera switching on D-pad up and look controls on the D-pad keep your thumbs on the steering and lean sticks during a moto. If you use a standard controller, bind sit and stand to hold rather than toggle; that habit is easier to carry into tighter track sections. The rear brake on L3 is another useful pairing because you can brake-tap in the air without releasing the steering stick.

Common FOV Mistakes to Avoid

  • Treating 120 as a speed upgrade. It changes visibility, not horsepower, grip, or suspension.
  • Mixing Onboard 1 and Onboard 2. A mismatch can make camera switching feel like a different game.
  • Changing FOV before fixing steering. If the bike feels twitchy, the problem may be sensitivity, not the camera.
  • Using a wide view to cover for late braking. FOV can show a braking point, but it cannot give you more stopping power.
  • Ignoring comfort. If the edges feel distracting or the view feels strained, test 115.

Avoid treating Motocross The Game FOV settings as a magic lap-time fix. The slider changes what you see, not how the bike grips, brakes, or lands. Use it to make your reference points clearer, then improve lap times through smoother inputs and better lines. A stable view lets you repeat those lines more often.

FAQ

What are the best Motocross The Game FOV settings for first person?

Start with 120 on both Onboard 1 and Onboard 2. If the edges feel too wide, test 115. Keep the same value on both cameras so switching views does not change your sense of speed.

Do Motocross The Game FOV settings make you faster?

Not by themselves. Motocross The Game FOV settings affect visibility and comfort, not bike physics. A clearer view can help you spot lines and braking points, but lap time still comes from smooth inputs and track knowledge.

Should Onboard 1 and Onboard 2 use the same FOV?

Yes, matching them is the safer starting point. A 120/120 setup keeps your visual reference consistent when you switch cameras. If you prefer different values, change only one at a time and test on a familiar track.

Can I use a lower FOV if 120 feels uncomfortable?

Yes. Test 115 or another lower value in the in-game slider. Choose the setting that lets you see the bike, the rut, and the next corner without feeling like the screen is rushing past. Comfort and consistency matter more than copying a number.